Viper Connect 4-16×32
Ground breaking short eye-relief design, gives the Viper Connect an amazingly wide field of view – almost double at 10x compared to a conventional scope. (3-12×32 model)
Ultra-low semi-target turrets on a 30mm tube
AMD2 illuminated reticle
Side adjustable PA (down to 10 yards)
Integral objective cover
Rubber eyepiece extender supplied
Variable brightness illuminated reticle with separate on/off switch to retain illumination setting.
Viper Connect 4-16×32
No other scope looks or performs like it! ! Developed specifically for low-recoil PCP airguns, .22 rimfire and .17 HMR rifles, the Viper Connect features super-short eye relief – just 17mm – for a ‘through the lens’ view that effectively brings you a closer, more focused image of your target.
The Viper Connect’s lens array also boosts its field-of-view – almost double at 10x compared to a conventional riflescope.
The new 4-16x Viper Connect has been paired to a 32mm diameter objective lens for the brightest of sight pictures in the trickiest of lighting scenarios. And the centre of the latest AMD2 reticle – can be illuminated to varying intensities.
The 4-16 Viper connect also features a unique cant indicator to assist with adjusting hold over and hold under for those tricky angled shots.
Finger-adjustable and resettable .1 MIL turrets are protected by screw-off caps and parallax can be dialled in via a side turret from just 10 metres. infinity down to 10 metres.
Viper Connect 4-16×32
- MTC Viper Connect
4-16×32 - 4-16x Magnification
- 32mm Objective Lens
Viper Connect Recommended For
Viper Connect features
- Ultra-low semi-target turrets on a 30mm tube
- AMD2 illuminated reticle
- Side adjustable PA (down to 10 yards)
- Integral objective cover
- Small, light and compact
- Rubber eyepiece extender supplied
- Waterproof, fogproof
- NB: Only suitable for low or non-recoiling rifles.
Viper Connect Reticle Options
Viper Connect Video Reviews
Viper Connect Technical Specifications
- MTC Viper Connect 4-16×32
- Magnification 4-16x
- Objective Lens – 32mm
- Field of view (feet@100yds) – 20.3m/60.9ft ~ 5.2m/1.56ft
- Diopter Adj – +/-4
- Eye Relief – 17mm
- Parallax Setting – 10m -infinity
- Adj per click – 1cm @ 100m
- Max turret adjustment – 35 MIL
- Clicks per one turret revolution – 48
MOA per one turret revolution – 12
Impact point correction in one click @ 100m – 0.73cm
- Tube – 30mm
- Illuminated reticle with separate on/off and brightness control
- Length – 340mm
- Weight – 650g
- Reticle position – Second Focal Plane
- Reticle type – AMD2